Micro Motion RFT9709 Manual de instrucciones descargar pdf (Pagina 50)

Using ProLink

Software with Micro Motion

Transmitters

File Menu: Print

continued

Print setup

2. At the Add Transmitter Tag dialog box, use the Tag Name option

buttons to select a device. If a device other than the connected

transmitter [CurCon] is selected, enter the polling address or HART

tag name in the text box. A device cannot be added to the ticket

definition file if a device with the same tag name already exists in the

file.

3. Use the Transmitter Type option buttons to specify one of three

available transmitter types:

• Select RFT9739 to poll for parameters available from an

RFT9739. When using Modbus protocol, select this option for all

devices on the ticket.

• Select RFT9712/9729/9739 to poll under HART protocol for

parameters common to all three transmitter models.

• Select IFT9701 to poll for parameters available from an IFT9701

or IFT9703.

• Select Other HART v.5 or higher to poll for parameters available

from transmitters or other devices that have HART 5.0 or higher

revision software.

4. Click OK to add the device to the ticket.

To remove a device from the ticket:

in the Transmitter Connections

frame, select the device from the Tag Names list, then choose Remove.

When a device is removed from a ticket, the fields associated with the

device are also removed.

Fields on ticket

To add a parameter to a device on the ticket:

1. Choose Add in the Fields on Ticket frame. The Edit Field Tag

Parameter dialog box appears as shown in

Figure 4-4

2. Select a device from the Tag Name text box. Each device includes

the polling address or HART tag name, followed by the transmitter

type in brackets.

3. All the parameters available from the chosen device appear in the

Parameter list box. To add a parameter, select it, then click OK.

Figure 4-4. Edit Field Tag

Parameter dialog box

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 213 214

Sin comentarios

Micro Motion RFT9709 Manual de instrucciones Pagina 50