Micro Motion RFT9709 Manual de instrucciones descargar pdf (Pagina 46)

Using ProLink

Software with Micro Motion

Transmitters

File Menu: Database

continued

Remove command

To send a configuration file to the transmitter:

1. Open the File menu, then choose Connect.

2. Select the desired transmitter, then click OK.

3. Reopen the File menu, then choose Database.

4. Use the Transmitter Database dialog box to select the configuration

file to be sent to the transmitter, then choose Send.

3.7 Remove command

The user can erase (remove) configuration files with the ProLink

program in the connect or offline mode.

To remove a configuration file from the transmitter database:

1. Open File menu, the choose Database.

2. Select the configuration file to be erased, then choose Remove.

3.8 On-screen viewing of

transmitter configuration

files

Use a text editor program, such as WordPad or Notepad, for on-screen

viewing of transmitter configuration files.

To view a transmitter configuration file:

1. Open a transmitter configuration file in WordPad or Notepad.

Transmitter configuration files are located in the default ProLink

directory, and are saved with a .CFG extension.

2. The chosen transmitter configuration file appears on screen as

depicted in

Figure 3-4

Figure 3-4. Typical transmitter

configuration file

3.9 Exporting transmitter

configuration files

Because transmitter configurations are stored as text files, they can

readily be imported into spreadsheets, word processors, and other

software applications. For more information about importing files, see

the documentation for the application that will receive the configuration.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 213 214

Sin comentarios

Micro Motion RFT9709 Manual de instrucciones Pagina 46